DECRA-FLEX 200 Exterior Elastomeric Masonry Coating – Smooth

A premium quality, high build, smooth elastomeric specially formulated for the specific demands of precast and tilt-up slab concrete. Decra-Flex 200 Elastomeric Masonry Coating offers increased adhesion and better early moisture resistance for off-season painting. Provides a long lasting weather-resistant finish on exterior, above grade precast and tilt-up slab concrete, vertical masonry, stucco and poured concrete. May also be used on primed wood, primed metal and properly prepared, previously painted surfaces. It provides a waterproof film, even against 98 mph wind-driven rain, yet breathes to allow entrapped moisture vapor to escape, preventing blistering. Good elongation properties allow the film to expand and contract over existing hairline cracks without the reoccurrence of cracking through the film. Use as an intermediate and finish coat for new construction and maintenance on architectural, commercial and industrial structures, including hotels, office buildings, apartments, condominiums and schools. Do not use below grade, under water or in interior areas.

Key Benefits:

Excellent adhesion to tilt-up concrete.
Cement board and stucco.
Provides long lasting weather-resistant finish.

Datasheet: Smooth (DN2221)

DECRA-FLEX 300 Exterior Elastomeric Masonry Coating - Smooth

A premium quality, high build, waterborne coating, available in Smooth, Fine and Coarse textures. The Unique U-VOX Technology enables Decra-Flex 300 Elastomeric Masonry Coating to form a hard dirt-resistant shell on the outside, while remaining elastic at its core. Provides a long lasting weather-resistant finish on exterior, above grade vertical masonry, stucco and poured concrete. May also be used on primed wood, primed metal and properly prepared, previously painted surfaces. It provides a waterproof film, even against 98mph wind-driven rain, yet breathes to allow entrapped moisture vapor to escape, preventing blistering. Superior elongation properties allow the film to expand and contract over existing hairline cracks without the reoccurrence of cracking through the film. Use as an intermediate and finish coat for new construction and maintenance on architectural, commercial and industrial structures, including hotels, office buildings, apartments, condominiums and schools. Do not use below grade, under water or in interior areas.

Key Benefits:

• Bridges existing hairline cracks.
• Excellent to use on weathered concrete & stucco surfaces.
• Maintains flexibility at low temperatures.

Datasheet: Smooth (DN2260)

For more information on AkzoNobel, please visit http://www.akzonobel.com/us